Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, grease, and any other contaminants. Fill any holes or cracks and sand smooth.
- Priming: If painting over a previously painted surface with a different colour, or a porous surface, apply a suitable primer first.
- Application: Stir the paint well before use. Apply two coats for the best results, allowing the first coat to dry completely before applying the second. Use a brush, roller, or spray, depending on your preference and the size of the area.
- Drying Time: Allow approximately 2-4 hours of drying time between coats, and 24 hours for full cure.
- Compatibility: Compatible with most surfaces, but always test on a small, inconspicuous area first, especially when painting over existing paint.
- Care: Clean any spills immediately with a damp cloth. For general cleaning, use a mild detergent and water, and avoid abrasive cleaners.
