Farrow & Ball Estate Emulsion Paint - Wimborne White - 2.5L

No, Farrow & Ball Estate Emulsion is not recommended for bathrooms or other high-moisture areas. For such spaces, consider Farrow & Ball's Modern Emulsion or Exterior Eggshell, which offer greater durability and resistance to humidity.

For best results and to achieve the full depth of colour, two coats of Farrow & Ball Estate Emulsion are generally recommended over a suitable primer and undercoat.

The paint is usually dry to the touch within 2-4 hours, but a recoat time of 4-6 hours is recommended, depending on ambient temperature and humidity.

No, Farrow & Ball Estate Emulsion is designed for interior walls and ceilings. For furniture, you would need a paint with a different finish and durability, such as Farrow & Ball's Eggshell or Full Gloss.

To clean, gently wipe the surface with a damp, soft cloth. Avoid using abrasive cleaners or scrubbing vigorously, as this can damage the chalky finish.

Farrow & Ball recommends using their own Wall & Ceiling Primer & Undercoat for optimal adhesion and colour development.

Wimborne White is a versatile, soft white with a touch of warmth, making it suitable for a wide range of interior settings without appearing stark.

Ensure adequate surface preparation. Apply a suitable Farrow & Ball primer and undercoat. Apply a second coat of paint if necessary, ensuring sufficient drying time between coats.

Ensure paint is thoroughly stirred before and during application. Apply paint evenly with consistent brush/roller strokes. Avoid overworking the paint. Ensure consistent drying conditions.

Although low VOC, some odour may be present. Ensure good ventilation during and after application. The odour should dissipate as the paint fully cures.

Clean brushes and rollers immediately after use with soap and water. Dried paint can be difficult to remove.