Schwalbe Impac Inner Tube - 16"" - Schrader Valve

The recommended tire pressure is typically printed on the sidewall of your tire. Always inflate your tires within the specified range.

This inner tube has a Schrader valve, also known as a "car type" valve.

No, this tube has a Schrader valve, you will need a pump specifically designed for Schrader valves.

Store the inner tube in a cool, dry place, away from direct sunlight and extreme temperatures.

If you get a flat tire, you will need to remove the wheel, replace the inner tube, and re-inflate the tire. Carry a spare inner tube, tire levers, and a pump.

The tire size is printed on the sidewall of your tire. Look for the size in inches (e.g., 16"" x 1.75"" - 2.25"")

Check for punctures by inflating the tire and listening for hissing sounds. Locate the puncture and either patch the tube or replace it.

Tighten the valve core using a valve core tool. If the leak persists, the valve core may need to be replaced.

Ensure the pump is properly connected to the Schrader valve. Check for any obstructions in the valve.

Ensure the tire is properly seated on the rim and inflated to the correct pressure. Make sure the inner tube isn't pinched between the tire and rim during installation.