Bostik Tile Adhesive - Grey

Refer to the product packaging for the exact water ratio. Typically, it's around 4.5-5.5 liters of water per 20kg bag, but always confirm with the instructions for best results.

The pot life is approximately 3 to 4 hours at 20°C. This can be affected by temperature and humidity.

The open time is approximately 20 minutes at 20°C. This is the time you have to adjust tiles after application.

Yes, Bostik MC310 OPF is suitable for fixing natural stone tiles, provided the substrate is stable and prepared correctly.

Yes, it is suitable for most interior and exterior installations, including those exposed to weather.

The adhesive typically sets in approximately 24 hours at 20°C. Full strength may take longer, consult product data for specific curing times.

Yes, it is suitable for use with WBP 15mm plywood overlay, provided the plywood is securely fixed.

Ensure you are using the correct water-to-powder ratio as specified by the manufacturer. Adjustments may be needed based on ambient temperature and humidity.

Verify that the correct amount of adhesive is being applied with the appropriate trowel notch size. Ensure the substrate is level and the adhesive has not started to skin over before placing tiles.

Work in smaller batches. Ensure the ambient temperature is within the recommended range. Avoid direct sunlight or heat sources on the mixed adhesive.

Confirm the substrate was adequately prepared, clean, and dry before application. Ensure the adhesive was applied evenly and the correct type of trowel was used.