Gyproc Easi-Fill Powder Filler - 5Kg

Mix the powder with clean water according to the instructions on the packaging until a smooth, lump-free consistency is achieved.

The working time is approximately 45 minutes.

The setting time is approximately 70 minutes.

Yes, Gyproc Easi-Fill adheres well to painted surfaces.

Store the remaining powder in a dry place, and reseal the packaging to prevent moisture contamination.

Yes, once the filler is completely dry, sand it smooth before painting or further decorating.

You will need a filling knife or similar tool for applying the filler and sandpaper for sanding after it dries.

It is suitable for both small and large repairs, however, very deep holes might require multiple applications.

Add a small amount of water to the mix and stir thoroughly until you achieve the correct consistency.

Ensure the filler is applied in thin layers. Avoid applying too much filler at once. In some cases, multiple coats may be needed.

Clean the surface thoroughly before applying the filler. Make sure the surface is free of dust, grease, and loose particles. Consider priming the surface.