DHHOUSE Chunky Glitter Wallpaper - Silver

Measure the width and height of the wall you wish to cover. Multiply the width by the height to get the total square footage. Each roll covers 2.2 sqm (44 cm x 5 m). Divide your total wall area by 2.2 to estimate the number of rolls needed, and add an extra roll for potential mistakes or pattern matching if applicable.

Yes, being peel-and-stick, it is designed for relatively easy removal from suitable surfaces. Peel slowly and carefully, ideally at a slight angle, to minimize residue or wall damage. It is recommended to test removal in an inconspicuous area first if you have concerns.

The chunky glitter is applied to the surface and is generally durable with gentle care. Avoid abrasive cleaning or excessive rubbing, which can dislodge the glitter. For maintenance, use a slightly damp soft cloth for cleaning.

While it can be used in areas with low moisture, it is not recommended for very humid environments like directly behind a shower or above a stove. Ensure the area is well-ventilated and the wallpaper is not exposed to prolonged moisture or steam.

This means that wallpaper produced in different manufacturing batches might have minor variations in color or shade. To ensure a consistent look, it's crucial to purchase all the rolls needed for a single project from the same order or batch.

The product description states it is 'pre-pasted', but also highlights 'peel and stick' application. In the context of peel-and-stick, 'pre-pasted' typically refers to the adhesive being on the backing paper ready to be revealed upon peeling, rather than a separate paste needing application.

Ensure the wall surface is thoroughly clean, dry, and smooth before application. Re-press firmly along the edges. If the issue persists, the surface may not be suitable or may require priming.

Gently lift the applied section and re-smooth it onto the wall, working from the center outwards. Use a soft cloth or a plastic squeegee to push out air bubbles as you apply.

Ensure you are starting the peel from a clean edge. If it's sticking, try using a piece of tape to help lift the backing. Avoid pulling too quickly, which could tear the paper.

This can sometimes occur during initial application. Ensure firm pressure is applied during smoothing. Excessive shedding after installation might indicate a surface that is too porous or rough. Gentle cleaning is advised.