Chunky Glitter Wallpaper - DHHOUSE - Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This DHHOUSE Chunky Glitter Wallpaper in Gold is designed for DIY decorators seeking to add a touch of instant luxury to any room. Its key benefit is the easy peel-and-stick application for a dazzling, high-impact metallic finish. A potential caveat is that it's best suited for dry, smooth surfaces, and its strong adhesive may require careful removal.
All features
| Colour | Gold |
|---|---|
| Brand | DHHOUSE |
Extended Product Information
FAQs
What is the exact size of one roll?
One roll measures 44 cm wide by 5 metres long, covering an area of 2.2 square meters.
Do I need to use wallpaper paste?
No, this wallpaper is pre-glued and self-adhesive. You simply peel off the backing and stick it to the wall.
Can this wallpaper be applied to a bathroom wall?
It is best suited for dry surfaces. While it can be used in a low-moisture area like a powder room, avoid areas with direct, prolonged steam or high humidity, such as shower walls.
How thick is the glitter wallpaper?
The wallpaper has a thickness of 1mm.
How do I clean the glitter surface?
Gently wipe with a slightly damp cloth. Avoid abrasive cleaners or excessive moisture.
Can I reposition the wallpaper if I make a mistake?
Due to its strong adhesive, repositioning can be difficult and may risk damaging the wallpaper or the wall surface. Apply with care and precision.
What surfaces are recommended for application?
It is recommended for dry, smooth, and clean surfaces like painted walls, glass, metal, and finished wood.
Troubleshooting
Wallpaper not adhering properly
Ensure the wall surface is completely clean, dry, and smooth. Re-press the edges firmly. If the surface is porous or has texture, it may not provide adequate adhesion.
Bubbles or wrinkles appear after application
Carefully lift the affected section of the wallpaper and reapply, smoothing it out from the center towards the edges. Use a soft cloth or squeegee to push out air pockets.
Difficulty removing the backing paper
Ensure you start peeling from a corner where the backing is designed to separate easily. If it's sticking, try using a thin, blunt tool to gently lift an edge.
Glitter seems to be shedding
This can occur during application if handled roughly. Ensure firm pressure is applied during smoothing. Once applied, minimal shedding should occur with gentle cleaning.
Pros and Cons
Pros
- Adds instant glamour and a high-impact metallic look.
- Easy peel-and-stick application saves time and effort.
- The chunky glitter provides a noticeable and attractive shimmer.
- Suitable for various decorative accent wall projects.
- Durable 1mm thickness offers a quality feel.
Cons
- Requires dry and smooth surfaces for optimal adhesion.
- May be difficult to reposition once applied due to strong adhesive.
- Large areas might require careful alignment of glitter patterns.
- Potential for glitter shedding if not applied or handled carefully.
- Removal might require specific techniques to avoid surface damage.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and smooth. Remove any dust, grease, or old wallpaper residue.
- Measure and cut the wallpaper to the desired size, allowing for a slight overlap if needed.
- Peel back a small section of the adhesive backing from the top edge.
- Carefully align the wallpaper to the edge of the surface and press it into place.
- Slowly peel off the remaining backing while smoothing the wallpaper onto the surface with your hands or a soft cloth, working from top to bottom.
- Trim any excess material at the edges with a sharp blade.
Compatibility:
- Suitable for smooth, dry, and clean surfaces such as painted walls (ensure paint is well-adhered), glass, metal, and finished wood.
- Not recommended for textured walls, unpainted drywall, damp surfaces, or floors.
Care:
- To clean, gently wipe the surface with a slightly damp cloth. Avoid using abrasive cleaners or excessive moisture, as this can damage the glitter finish.
- For stubborn marks, use a mild soap solution on a damp cloth and wipe dry immediately. Glitter may be sensitive to harsh chemicals.