Gul FLEXOR 32 YULEX BLINDSTITCHED FULL WETSUIT - Black - Size 12

YULEX(r) is a natural rubber derived from trees, certified by FSC(r) and PEFC(r). It's used as a more sustainable alternative to neoprene, offering comparable performance characteristics like flexibility and warmth.

The S-Lock Flush Barrier is a design feature around the back zip entry that, combined with the PK stainless steel zipper and the Pro GlideSkin collar, creates a seal to minimize water entry into the wetsuit, keeping you warmer and more comfortable.

The FLEXOR 32 YULEX wetsuit provides significant warmth with its ThermoSpan and Micro2Flex linings. For very cold conditions, it is recommended to pair it with additional accessories like wetsuit boots, gloves, and a hood.

A correct fit means the wetsuit is snug all over without restricting breathing or circulation. There should be no large baggy areas. The collar, cuffs, and ankles should feel comfortably tight against the skin to prevent water flushing.

No, machine washing is not recommended. Always rinse the wetsuit with fresh, cool water after each use. If a deeper clean is needed, use a basin with cool water and a wetsuit-specific shampoo, then rinse thoroughly.

Blindstitched seams involve stitching that goes 3/4 of the way through the neoprene, creating a strong seam that is also flexible. The G-Tape internal taping adds an extra layer of reinforcement and water resistance at critical stress points.

Ensure the wetsuit is completely dry. Using a small amount of water or a wetsuit lubricant on your skin can help. Pull the material up gently, avoiding fingernails. Check that there are no twists in the legs or arms.

Ensure the back zip is fully closed and the S-Lock barrier is engaged. Check that the Pro GlideSkin collar and S-Seal cuffs/ankles are snug against your skin. If flushing persists, inspect for any tears or damage around these areas.

This can be due to improper rinsing or drying. Ensure you rinse thoroughly with fresh water after every use and dry away from direct sunlight. Avoid storing in damp conditions. Consider using a wetsuit conditioner specifically designed for natural rubber.

Inspect the G-Tape internal taping at critical points. If minor separation occurs, a wetsuit repair adhesive might offer a temporary fix. For significant seam damage, professional repair may be necessary.