Gul FLEXOR 32 YULEX WOMENS BS STEAMER - Black - 14

YULEX(r) is a natural rubber derived from the hevea tree, certified by FSC(r) and PEFC(r). It's used to provide a more sustainable and eco-friendly alternative to traditional neoprene, offering excellent performance characteristics.

Blindstitching involves seams that are stitched through only one layer of neoprene, leaving the thread hidden and creating a flat, strong, and water-resistant seam. G-Tape internal taping further reinforces critical areas.

A 3/2mm wetsuit like this is generally suitable for water temperatures between 13°C and 20°C (55°F to 68°F), depending on individual tolerance and conditions. The thermal lining enhances warmth in cooler parts of this range.

The RevoFit 3D pattern is designed for a contoured fit. Measure yourself accurately and compare with the sizing chart. The wetsuit should feel snug all over without restricting breathing or movement. There should be no major wrinkles or baggy areas.

While optimized for surfing, its flexibility and warmth make it suitable for other board sports like paddleboarding or windsurfing. However, for high-impact or abrasive watersports, additional protection might be needed.

'BS' typically refers to 'Back Zip' entry, indicating the type of closure system used on this wetsuit.

Powrtex4 knee pads are designed for enhanced durability in high-stress areas like the knees, providing protection against abrasion and wear from the surfboard or SUP.

Natural rubber can be stiffer initially. Wear the wetsuit in warm water for a short period to help it soften. Ensure it's properly rinsed and dried after use according to care instructions.

Check that the back zip is fully closed and the S-Lock barrier is engaged. Ensure the GlideSkin collar and S-Seal cuffs/ankles are snug against your skin. Adjust the fit if necessary.

Rinse the zipper with fresh water to remove salt and sand. Apply a small amount of zipper lubricant (like beeswax or a silicone-based zipper lubricant) to the teeth. Do not force the zipper.

Ensure the wetsuit is thoroughly rinsed and completely dry before storage. If odor persists, use a wetsuit-specific cleaner or a mild solution of diluted vinegar and water, followed by a thorough fresh water rinse and air dry.