Best current price£52.15from The Range
Shopping.co.uk recommended and popular offers
The Range£52.15Visit shop Jcp Construction Products Shield Anchors Loose Bolt Zyp - M8 X 60/10Mm (Box Of 130) - White
Visit shop23 offers from £52.15 - £89.34
View price history by clicking the chart icon.
The JCP Construction Products Shield Anchors Loose Bolt ZYP (M10 x 85/25mm) are heavy-duty mechanical fixings specifically engineered for professionals and DIY enthusiasts requiring a reliable, secure connection in concrete and masonry substrates. Offering superior load-bearing capacity and a straightforward installation process, these anchors are ideal for mounting heavy fixtures; however, they require a correctly sized drill bit to ensure the expansion mechanism functions effectively within the host material.
| Colour | White |
|---|---|
| Model Part Number | M10 x 85/25mm |
| Brand | JCP CONSTRUCTION PRODUCTS |
No, these shield anchors are designed for solid substrates like concrete and solid brick. They will not function correctly in hollow materials.
ZYP stands for Zinc Yellow Passivated, which is a chemical conversion coating used to provide corrosion protection to the steel component.
Yes, ensure the hole is at least as deep as the anchor body plus a small clearance for debris to ensure the bolt can be tightened fully.
Yes, the loose bolt design allows you to unscrew the bolt while the expansion shield remains embedded in the masonry.
While the ZYP finish offers some corrosion resistance, these are best suited for internal or dry, protected environments. For coastal or highly exposed areas, stainless steel fixings are recommended.
The hole may be too wide or the material is too soft. Ensure the drill bit size matches the manufacturer's specification for the anchor.
Check that the base material is solid masonry or concrete; the anchor will not expand properly in soft or crumbling materials.
Ensure the hole is deep enough and that all drilling dust has been cleared from the bottom of the hole.
To install these anchors, drill a hole into the base material matching the specified diameter of the M10 anchor. Clear all dust and debris from the hole using a brush or blower, as residual dust can impede expansion. Insert the anchor shield into the hole until it is flush with the surface. Position your fixture, insert the bolt, and tighten with a wrench until firm. Avoid over-torquing, which may damage the expansion sleeve. For ongoing care, periodically inspect the bolt head for signs of rust or loosening, particularly in environments exposed to slight moisture, and re-tighten if necessary to maintain structural tension.
