Underfoot Carpet Gripper Rods - Pack of 15

Yes, these are designed to provide the necessary tension for stretch-fit carpet installations, including stairs.

Yes, these gripper rods are compatible with concrete subfloors, though you must use suitable masonry nails or construction adhesive.

Ideally, place the grippers 6mm to 10mm away from the skirting board to create a space for the carpet edge to be tucked.

Each pack includes 15 strips of 1.52 meters, providing a total of 22.8 meters or 75 feet of coverage.

No, these are specifically designed for stretch-fit carpet installations and are not suitable for glue-down tile methods.

They are compatible with the majority of standard carpet underlays; ensure the thickness of the underlay matches your gripper height requirements.

Ensure the pins are angled toward the wall and the carpet was properly stretched during the initial installation.

If using on concrete, ensure you used the correct masonry fasteners; if on wood, ensure the nails are driven fully flush into the subfloor.

Use a sharp hacksaw to cut the metal base of the gripper rod; ensure you are wearing gloves to protect hands from sharp edges.