Arrow T50 Staples - 10mm (3/8in) - 5000 Count - A506IP

These staples are compatible with Arrow T50, T55, T50PBN, HT50P (up to 12mm only), HTX50, ETFX50, ETF50PBN, CT50K, 5700, and 8000 staplers.

The Arrow T50 staples are 10mm (3/8 inch) in length.

The Arrow T50 staples come in a bulk pack of 5,000.

Store the staples in a dry place to prevent rust.

Refer to your stapler's manual for specific instructions on clearing staple jams. Generally, you'll need to open the magazine and remove the jammed staples.

These staples are best suited for projects where a 10mm (3/8 inch) staple length is appropriate. Always consider the material thickness and type before using.

Make sure you are pressing the stapler firmly against the surface, and that the staple length is sufficient for the material's thickness.

Clear the staple jam by following your stapler's specific instructions. Ensure you are using the correct staple size for your stapler and material.

Ensure the stapler is pressed firmly against the material. Check that the staple length is appropriate for the thickness of the material.

Check the stapler's driving mechanism for wear or damage. Ensure the staples are loaded correctly in the magazine.