Underfoot Carpet Grippers - Pack Of 100 - 1.52M / 5Ft Strips

Each pack contains 100 carpet gripper strips.

One pack provides approximately 152 meters (500 feet) of coverage.

Yes, they are suitable for stairs, providing the necessary grip to keep carpet secure on steps.

You will need carpet gripper shears for cutting, a hammer and nails (or appropriate adhesive) for fixing, a carpet kicker, and a power stretcher for fitting.

While compatible with most underlays, it's recommended to check the compatibility of the specific underlay and adhesive used with your underfloor heating system.

Use standard carpet gripper shears to cut the strips to the exact dimensions required for your room. Allow for the recommended gap from the skirting board.

A gap of approximately 5-10 mm is typically recommended to allow for carpet expansion and ease of tucking.

Ensure the carpet is properly hooked onto the gripper teeth and was stretched with adequate tension. Check if the gripper strips are securely fastened to the subfloor.

Verify that the carpet is correctly tucked over the teeth and that the teeth are angled appropriately towards the wall. Ensure the carpet is not excessively worn at the edges.

Use specialized carpet gripper shears for a clean and precise cut. Ensure the shears are sharp and suitable for the material.

Confirm that appropriate fixings (e.g., concrete nails, suitable adhesive) are being used and that the concrete surface is sound and free of dust or moisture.