Best current price£44.15from Bradfords
Shopping.co.uk recommended and popular offers
Bradfords£44.15Visit shop Bedec Exterior Barn Paint 2.5Ltr - Matt Anthracite
Visit shop
B&Q£45.12Visit shop B&Q - Barn Paint Matt Anthracite Grey 2.5L
Visit shopBradfords£60.00Visit shop Bedec Exterior Barn Paint 5ltr Anthracite Acrylic Satin for Wood Metal and Plastic Cladding
Visit shop47 offers from £44.15 - £84.00
View price history by clicking the chart icon.
The Bedec Barn Paint in Anthracite Grey is designed for property owners seeking a durable, weather-resistant, and aesthetically pleasing coating for exterior structures like barns, outbuildings, and industrial buildings. Its key benefit is exceptional longevity and protection against the elements, reducing the need for frequent repainting. A potential caveat is its satin finish, which may not be suitable for all aesthetic preferences or previous paint types if not properly prepared.
| Colour | Grey |
|---|---|
| Model Part Number | BEDE2AVA017/40 |
| Brand | Bedec |
Bedec Barn Paint is suitable for wood, metal, and plastic cladding. It can also be applied to previously painted surfaces, including those treated with bitumen, tar varnish, or creosote, provided the surfaces are sound and properly prepared.
For best results and maximum protection, two coats are generally recommended. Ensure adequate drying time (2-4 hours) between coats.
The paint typically dries in 2-4 hours, allowing for recoating within this timeframe. This can vary slightly depending on temperature and humidity.
Yes, it can be applied to bare wood, provided the wood is sound and free from rot. For optimal results and longevity, especially on exterior wood, proper preparation and priming if necessary are advised.
Yes, Bedec Barn Paint is designed to be applied over existing bitumen, tar varnish, or creosote coatings, provided the surface is sound and well-adhered. It's always recommended to test on a small, inconspicuous area first.
This specific variant has a satin finish, offering a subtle sheen rather than a high gloss or a completely flat appearance.
Clean all application tools with water immediately after use. For the painted surface, use a damp cloth and mild detergent for cleaning.
Yes, Bedec Barn Paint is water-based and low in VOCs (Volatile Organic Compounds), making it a more eco-friendly choice compared to solvent-based paints.
Ensure the surface was thoroughly cleaned, dry, and free from contaminants before application. Abrade glossy surfaces and consider using a primer if applying to a difficult substrate or over unknown previous coatings.
Ensure paint is stirred thoroughly before and during use. Apply thin, even coats using a quality brush or roller. Avoid overworking the paint. Allow adequate drying time between coats.
Check ambient temperature and humidity. Ensure application was not done in extreme conditions (below 5°C or above 30°C) or in very high humidity. Ensure adequate ventilation.
While rare, slight variations can occur. To ensure colour consistency, mix all the paint from different containers into a larger, single container before starting your project.
Surface Preparation:
Ensure surfaces are clean, dry, and free from loose paint, dirt, grease, and other contaminants. For previously painted surfaces, including those treated with bitumen, tar varnish, or creosote, ensure good adhesion by lightly abrading or applying a suitable primer if adhesion is questionable. Bare wood should be sound and free from rot. Bare metal should be free from rust and treated with an appropriate metal primer if necessary.
Application:
This paint can be applied using a brush, roller, or spray. Stir the paint thoroughly before use. Apply in a well-ventilated area. For best results, apply two coats, allowing 2-4 hours drying time between coats. Avoid applying in temperatures below 5°C or above 30°C, or when rain is imminent.
Compatibility:
Suitable for use on wood, metal, and plastic cladding. It can be applied over existing paint finishes, including bitumen, tar varnish, and creosote, provided the surfaces are sound and properly prepared. Always test on an inconspicuous area if unsure.
Care:
Clean application tools with water immediately after use. For cleaning the painted surface, use a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
Johnstone's Trade Aqua Undercoat - Brilliant WhiteFrom £52
Johnstone's Trade Aqua Gloss - White - 5LFrom £50
Rustins Quick Dry Radiator Paint - Satin - WhiteFrom £10
Crown Quick Dry Gloss - Pure Brilliant WhiteFrom £26
Crown Quick Dry Gloss - WhiteFrom £14
Crown 2.5 Quick Dry Satin - WhiteFrom £26
Filltite High Performance 2Pt Wood Filler - Natural - 1KgFrom £18
Ronseal Diamond Hard Medium Oak Satin Varnish - 250mlFrom £8
Ronseal 5 Minute Smooth Finish Filler - White 600mlFrom £9
Rustins Quick Drying Radiator Enamel - Satin - GreyFrom £9
Rapide Tub Ready To Use Wood Filler - BrownFrom £6
Polycell Multi-Purpose Polyfilla Ready Mixed - 600GFrom £13
