Setup, Compatibility & Care Instructions
Surface Preparation
Before applying Ronseal Garden Paint, ensure all surfaces are clean, dry, and free from loose dirt, dust, or flaking material. For optimal adhesion on metal surfaces, a suitable metal primer must be applied first. For wood, light sanding may be beneficial, especially if the surface is particularly smooth or weathered. Ensure any previous finishes are sound and well-adhered; remove any loose paint or varnish.
Application
1. Stir Thoroughly: Before and during use, stir the paint well to ensure an even consistency and colour.
2. Apply: Use a good quality brush or roller. Apply in thin, even coats, working along the grain of wood where applicable.
3. Multiple Coats: For best results and durability, two coats are generally recommended. Allow adequate drying time between coats, though it becomes rainproof in an hour.
Compatibility
This paint is compatible with a wide range of garden materials, including:
- Wood
- Metal (requires priming)
- Terracotta
- Brick
- Stone
Care & Storage
- Tool Cleaning: Clean brushes and rollers immediately after use with warm, soapy water.
- Storage: Store the paint in its original container, in a cool, dry place, away from direct sunlight and protected from frost. Ensure the lid is tightly sealed.