Setup, Compatibility & Care
Getting the best results from your Ronseal Garden Paint requires proper preparation, application, and adherence to usage guidelines.
Preparation and Application:
- Surface Preparation: Ensure the surface you intend to paint is clean, dry, and free from loose dirt, flaking paint, or grease. For previously painted surfaces, lightly sand to provide a key for adhesion. No primer is typically needed.
- Stirring: Thoroughly stir the paint before and periodically during use to ensure consistent color and finish.
- Application: Apply the paint using a brush or roller. Work in the direction of the grain for wood surfaces.
- Coats: For optimal color depth and protection, apply three coats. If you are painting a lighter color like Cool White Ash over a darker existing color, you might need additional coats to achieve full opacity.
- Drying Between Coats: Allow a minimum of 4 hours between coats. The paint will be rainproof in 1 hour after application of each coat.
Compatibility:
- Suitable Surfaces: This paint is designed for exterior wood, brick, terracotta, metal, and stone.
- Unsuitable Surfaces: DO NOT apply this paint on decking surfaces. It is also not suitable for stone or any other surface that will be walked on, as it does not provide the necessary hard-wearing resistance for foot traffic.
Care and Maintenance:
- Cleaning Tools: As a water-based paint, brushes and rollers can be easily cleaned with warm soapy water immediately after use.
- Spills: Clean up any spills or drips immediately with a damp cloth before the paint dries.
- Storage: Store the paint in its original container in a dry place, away from extreme temperatures and direct sunlight. Keep the lid tightly sealed to prevent drying out. > Info needed: Exact storage temperature range details.
- Recoating: If areas show signs of wear after several years, a fresh coat can be applied to revive protection and appearance.