Setup, Compatibility & Care
To ensure the best possible results and maximize the 15-year performance of Zinsser Allcoat Exterior Water Based Satin, proper preparation is essential.
Surface Preparation
- Clean: Ensure all surfaces are clean, dry, and free from dirt, loose paint, grease, and fungal growth. Use a suitable fungicidal wash if mould or algae is present.
- Sand: Lightly sand glossy surfaces to create a key for better adhesion. Remove all sanding dust.
- Fill: Fill any cracks or holes with an appropriate exterior filler.
- Prime: While Allcoat can often be self-priming, very porous or problematic surfaces may benefit from a dedicated Zinsser primer for optimum adhesion and finish. Always refer to product technical data sheet for specific priming recommendations.
Application
- Stir: Thoroughly stir the paint before and during use.
- Apply: Apply using a brush, roller, or airless spray. For airless spray, follow manufacturer guidelines for equipment setup.
- Coats: Apply 2 coats, allowing 1 hour drying time between coats.
- Temperature: Apply in temperatures between 10°C and 32°C. Avoid applying in direct sunlight or if rain is imminent.
Compatibility
This paint is highly versatile and compatible with a wide range of exterior substrates including:
- Wood: Fences, trim, doors, sheds, cladding.
- Metal: Gates, railings, guttering, downpipes (ensure rust is treated first).
- Masonry: Render, brickwork, concrete.
- Plastic: UPVC, plastics (test a small area first for specific plastic types).
- Concrete: Floors, walls.
- Cladding: Various types of exterior cladding.
Care & Maintenance of Painted Surfaces
- Cleaning: Painted surfaces can be gently cleaned with mild detergent and water to remove dirt. Avoid abrasive cleaners or harsh scrubbing which can damage the finish.
- Inspection: Periodically inspect painted surfaces for any signs of damage or wear, especially after harsh weather conditions. Prompt touch-ups can extend the life of the coating.