Best current price£13.25from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£13.25Visit shop Everbuild Sika 605674 Eb25 Hybrid Sealant Adhesive Clear 300Ml
Visit shop
B&Q£14.54Visit shop B&Q - Eb25 Ultimate Sealant Adhesive White Food Safe Mould Resistant 300Ml
Visit shop13 offers from £13.25 - £94.99
View price history by clicking the chart icon.
The Everbuild EB25 Ultimate Sealant Adhesive in White is designed for professionals and DIYers needing a high-performance, versatile solution for sealing and bonding in demanding environments. Its key benefit is extreme flexibility combined with exceptional strength and adhesion to most surfaces, even underwater. A potential caveat is that it may require testing with certain paints before full application.
| Colour | White |
|---|---|
| Model Part Number | 605668 |
| Brand | Everbuild |
Everbuild EB25 is primarily a sealant and adhesive. While it offers high bonding strength, it is not intended for structural load-bearing applications where primary structural integrity relies solely on the adhesive bond. Always consult product datasheets for specific application guidance.
Curing time depends on temperature, humidity, and bead size. Typically, it skins over in approximately 15-30 minutes and can be handled or overpainted after a few hours. Full cure can take 24-48 hours depending on conditions.
Yes, Everbuild EB25 has passed the ISEGA standard for use in sanitary and food preparation areas, making it suitable for applications where food contact is possible.
Yes, it adheres well to most painted surfaces. However, for optimal adhesion and to avoid potential peeling of the paint, it's recommended to lightly abrade the painted surface and ensure it is clean and dry. Always test compatibility on a small area first.
Everbuild EB25 can be applied in temperatures between +5°C and +40°C. Once cured, it withstands temperatures from -40°C to +100°C.
Uncured EB25 can be cleaned up using a damp cloth or appropriate solvent. Cured EB25 needs to be removed mechanically.
Yes, once fully cured, Everbuild EB25 forms a waterproof and weatherproof seal, making it suitable for interior and exterior applications.
Ensure surfaces are clean, dry (or appropriately damp for wet application), and free from dust, grease, or old sealant. Re-test adhesion on a small area if unsure about surface preparation or paint compatibility.
Ensure the product has been stored correctly and is within its shelf life. Check that the cartridge has not been punctured incorrectly. Use a steady, even pressure on the sealant gun.
While EB25 has mould resistance, severe conditions may still allow growth. Clean the affected area thoroughly and ensure adequate ventilation. For persistent issues, consider a mould-inhibiting primer before re-sealing.
The paint used may not be compatible with the sealant. Remove the peeling paint, clean the sealant surface, and test a different type of paint on a small area before repainting the entire surface.
Setup:
Compatibility:
Care:
