Everbuild EB25 Hybrid Sealant Adhesive - Grey

Yes, once fully cured, the sealant can be painted over with most water-based and synthetic paints.

It adheres to a wide range of materials including wood, metal, glass, concrete, brick, plaster, and many plastics.

Yes, it is designed for both indoor and outdoor use and can withstand various weather conditions.

Yes, it is certified for use in sanitary and food preparation areas.

Curing time varies depending on bead size, temperature, and humidity. Generally, it becomes tack-free in a few hours and fully cures within 24-48 hours.

Yes, the EB25 Hybrid Sealant Adhesive has the capability to be applied and cure underwater.

This certification indicates that the product has very low VOC (Volatile Organic Compound) emissions, making it environmentally friendly and better for indoor air quality.

Ensure surfaces were thoroughly cleaned, dried, and free from dust or grease before application. Abrasive cleaning or priming may be needed for very smooth or contaminated surfaces.

Curing speed is dependent on temperature and humidity. Ensure application is within the recommended temperature range and allow sufficient time in very cold or humid conditions.

Tool the bead immediately after application with a damp (not wet) cloth or a plastic tooling spatula. Remove excess sealant with white spirit before it cures.

Ensure the cartridge nozzle is cut appropriately. If the product has been stored for a long time, the material inside might have partially cured; try carefully piercing any internal seal.