Best current price£5.21from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£5.21Visit shop Rustins Black Quick Dry Small Job Satin 250Ml Spblw250
Visit shop
B&Q£8.23Visit shop B&Q - Quick Dry Small Job Paint Satin Black 250Ml
Visit shopB&Q£8.23Visit shop B&Q - Quick Dry Small Job Paint Gloss Black 250Ml
Visit shop43 offers from £5.21 - £21.88
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking a durable, quick-drying black gloss paint for interior and exterior projects on wood and metal. The key benefit is its hard-wearing, water and oil-resistant finish that dries rapidly with low odor. A caveat to note is that it's intended for application over a primer or existing paint, not as a direct metal primer itself. Rustins Quick Dry Gloss Paint offers a tough, decorative coating suitable for various surfaces.
| Colour | Black |
|---|---|
| Model Part Number | BLAGW1000 |
| Brand | Rustins |
No, for optimal adhesion and rust prevention on bare metal, it is recommended to first apply a suitable primer, such as Rustins Quick Drying Primer Undercoat.
While touch dry in about 30 minutes, the paint will take approximately 24 hours to fully cure and achieve its maximum hardness and resistance properties.
This is a water-based paint. For thinning, use water sparingly. However, it is generally best used directly from the can for optimal results.
Yes, the hard-wearing and water/oil-resistant finish makes it suitable for areas that experience regular use, provided it is applied over a proper primer.
Clean all brushes and application tools immediately after use with warm soapy water. Rinse thoroughly.
Coverage varies depending on the surface porosity and application method, but typically expect around 10-12 square meters per litre.
Yes, it conforms to the Toys (Safety) Regulations 1995 and BS:EN71 Part 3, making it safe for use on items intended for children.
Ensure the surface was properly prepared and primed. Remove any dust, grease, or old, flaking paint. Stir the paint thoroughly before application.
Stir the paint more frequently during application. Use a good quality brush and apply thin, even coats. Avoid overworking the paint. Ensure the surface is smooth before starting.
Ensure application is within the recommended temperature and humidity range. Avoid applying excessively thick coats. Check that the surface was not overly porous and did not absorb too much solvent from the paint.
This can occur in humid conditions or if applied too thickly. Allow for extended drying time in a well-ventilated area. If necessary, a very light sanding and a further thin coat may resolve this.
Setup:
Ensure the surface to be painted is clean, dry, and free from dust, grease, and flaking paint. For best results on bare wood or metal, apply Rustins Quick Drying Primer Undercoat. Stir the paint thoroughly before application.
Compatibility:
Suitable for use on wood and metal surfaces. Can be applied over existing paints and varnishes, provided they are in good condition and properly prepared.
Care:
Clean brushes and equipment immediately after use with warm soapy water. Store paint in a cool, dry place away from direct sunlight and frost. Ensure the lid is tightly sealed.
