Best current price£109.99from eBay
Shopping.co.uk recommended and popular offers
eBay£109.99Visit shop Corsair Vengeance Pro 16GB (2x8GB) DDR4 3200MHz RAM CMW16GX4M2C3200C16
Visit shop
AWD-IT.co.uk£506.01Visit shop Corsair Black Vengeance 32Gb (2X16gb) Ddr5 Dram 5200Mhz C40 Memory Kit - Cmk32gx5m2b5200c40
Visit shop54 offers from £109.99 - £2,587.48
View price history by clicking the chart icon.
The Corsair Vengeance 128GB DDR5 memory kit is designed for power users, content creators, and professionals who demand massive memory capacity for high-end multi-tasking, complex rendering, and intensive system workflows. Delivering high-speed data transfer and efficient voltage regulation, it provides a significant performance boost for modern DDR5-capable systems. However, users should be aware that this high-density 128GB kit is specifically optimized for Intel 700 and 800 series motherboards, so compatibility verification is essential before installation.
| Colour | Black |
|---|---|
| Series | Vengeance |
| Model Part Number | CMK128GX5M2D6000C40 |
| Brand | Corsair |
This kit is specifically optimized for Intel 700 and 800 series motherboards using Intel XMP 3.0 profiles.
No, this specific Vengeance model features a low-profile, non-RGB design focused on performance and compatibility.
Mixing different memory kits is not recommended, as it can lead to system instability and reduced performance due to mismatched timings or voltages.
CAS latency 40 refers to the delay between the memory controller requesting data and the memory module providing it. It is a standard performance timing for high-density DDR5 modules.
Updating to the latest BIOS version is highly recommended when installing high-density memory to ensure optimal compatibility and system stability.
Ensure the RAM sticks are fully seated in the slots. Check your motherboard manual for the recommended slot configuration, usually slots 2 and 4.
You must enter your BIOS settings and manually enable the Intel XMP 3.0 profile. The system will default to base speeds until XMP is enabled.
Ensure you have the latest version of CORSAIR iCUE installed and check your BIOS settings to ensure SPD writing or relevant motherboard-to-software communication is enabled.
To ensure optimal performance, install the two modules into the appropriate DIMM slots as specified by your motherboard manual (typically slots 2 and 4). Upon first boot, enter your BIOS and enable the Intel XMP 3.0 profile to ensure the RAM runs at its rated 6000 MT/s speed. Without this step, the memory may default to a lower JEDEC standard speed.
Compatibility is focused on Intel 700 and 800 series platforms. Ensure your motherboard firmware is updated to the latest version before installation to guarantee the best stability with high-density 64GB modules. Keep the system free of dust, and ensure adequate airflow within your case to maintain the efficiency of the integrated heatsinks.
Corsair VENGEANCE DDR5 5200MHz CL40 Memory Kit - GreyFrom £240
DeWalt Galvanised Brad Nails - 35mm - 18g - SilverFrom £15
APC SRT Smart UPS 8000VA RM 230VFrom £5948
Eaton 5SC1500IRBS UPS - 1500VAFrom £718
Milwaukee PACKOUT Cabinet - 4932480623From £173
Blagdon Pond Filter System - GreenFrom £250
Callow Lifestyle Living Flame Cabinet HeaterFrom £163
Draper Expert Ultrasonic Cleaning Tank 3L - Draper - 92632From £227
ASUS Prime AP303 Tempered Glass Mid-Tower PC Case - BlackFrom £80
Hedbox Dual Battery Charger - RP-DC50From £50
Blackmagic Design Videohub Mini 4x2 12GFrom £521
Car Battery - Yuasa L35-115From £110