Draper Expert Ultrasonic Cleaning Tank 3L - Draper - 92632

You can use water or non-volatile cleaning agents. Always use solutions specifically designed for ultrasonic cleaning and appropriate for the items you are cleaning.

The cleaning cycle duration depends on the item and the degree of soiling. Start with shorter cycles (e.g., 3-5 minutes) and increase as needed. Monitor the process to avoid over-cleaning.

No, this ultrasonic cleaner is not suitable for cleaning gemstones.

After each use, drain the tank using the drain tap and rinse it with clean water. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.

Please refer to the documentation included with your product or contact Draper customer support for warranty information.

Yes, tap water can be used, but it's recommended to use distilled water in combination with cleaning solutions for better results. This will reduce the chance of mineral deposits.

Use the touch screen control panel to adjust the temperature. Refer to the cleaning solution's instructions for the recommended temperature range.

Check the power connection and ensure the unit is plugged in securely. Check the outlet by plugging in another device. Check the fuse.

Ensure the correct cleaning solution is being used. Adjust the time and temperature settings. Make sure items are fully submerged and not overcrowded in the basket. Consider using a stronger cleaning solution if the item is heavily soiled.

Inspect the drain tap and surrounding areas for leaks. Tighten the drain tap or replace the seals if necessary.

Ensure the screen is clean and dry. Restart the unit by turning it off and on again. If the issue persists, contact Draper support.