Easyblinds Easydoor Door Blind - Cream

The Easyblinds Easydoor Blind is primarily designed for glazed doors, whether internal or external. It relies on self-adhesive fasteners, so the door surface (frame or glass) must be clean, smooth, and suitable for adhesive application to ensure a secure hold.

The blind is designed to significantly reduce light, offering excellent privacy and darkness for most uses. While highly effective, achieving 100% blackout depends on the precision of installation and whether any minimal light might bypass tiny gaps around the edges. For maximum darkness, ensure a snug fit.

To clean the blind, simply wipe it gently with a damp cloth. Do not use harsh chemical cleaners, abrasive materials, or attempt to machine wash or submerge the blind, as this may damage the fabric or adhesive components.

Yes, the self-adhesive fasteners are designed to be removable. When removing, peel them off slowly and carefully. We recommend testing in an inconspicuous area first, especially on painted surfaces, to ensure no damage occurs.

One of the key benefits of the Easyblinds Easydoor Blind is its customizable fit. The material is easy to cut to size using sharp scissors or a utility knife, allowing you to achieve a perfect fit for various door dimensions.

Yes, the fabric of the Easyblinds Easydoor Blind provides an additional layer of insulation. This helps to reduce heat transfer through your glazed door, contributing to keeping your room cooler in the summer and warmer in the winter, potentially saving energy.

Ensure the door surface is completely clean, dry, and free of any grease or residue before application. Press the fasteners firmly for at least 30 seconds and allow them to cure for a few hours before hanging the blind. For very cold surfaces, allow them to warm up first.

Verify that the blind was cut and installed to fully cover the glazed area with a slight overlap onto the frame. If the issue persists, consider adding thin, decorative trim around the blind's edges to block light gaps.

Accurate measurement is key. Always 'measure twice, cut once.' When cutting, use a straight edge and a sharp utility knife or heavy-duty scissors to ensure a clean, straight line. Minor imperfections can sometimes be hidden by adjusting the placement of the adhesive fasteners.

Check that the straps are positioned correctly and snugly around the rolled blind. Ensure the blind is rolled tightly and evenly. If the straps feel loose, re-roll the blind more compactly.