Humbrol Enamel Paint - 14ml - White - AA0535

Humbrol Enamel Paint is suitable for use on a wide range of surfaces, including plastic, metal, wood, glass, ceramics, cardboard, and sealed plaster.

Use Humbrol Enamel Thinners. The usual thinning ratio is 2 parts paint to 1 part thinner, but this may vary depending on application method and desired consistency.

Touch dry in 20-40 minutes for matt and satin finishes. Full hardening can take up to 24 hours. Drying times will vary based on environmental conditions. Metallic paints can take around 10 days to fully dry.

Clean brushes immediately after use with Humbrol Enamel Thinners.

Yes, Humbrol Enamel Paint is suitable for use with an airbrush. Thin the paint with Humbrol Enamel Thinners to the appropriate consistency for your airbrush.

Humbrol Enamel Paints are available in Matt, Satin, Gloss, Metallic, and Metalcote finishes, though finish availability varies by color.

A 14ml tin covers approximately 0.3m², depending on the thickness of application.

Humbrol Enamel Paint is recommended for children. Always ensure adult supervision during use.

Thin the paint with Humbrol Enamel Thinners before application. Ensure proper mixing.

Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces. Consider using a primer.

Ensure adequate ventilation. The drying time can be affected by humidity and temperature. If needed, use a drying accelerator (check compatibility).

Apply the paint in thin, even coats. Use a high-quality brush. For a smoother finish, consider airbrushing.

Ensure the surface is properly prepared. Apply thin coats and allow each coat to dry completely before applying the next. Avoid handling the painted surface before it is fully dry.