151 Coatings Yacht Varnish - Gloss - 180ml

This varnish is primarily designed for wood. While it might adhere to well-prepared painted surfaces, it's recommended for use on bare or previously varnished wood for optimal results and durability.

For best protection and finish, applying two to three thin, even coats is generally recommended. Allow sufficient drying time between each coat.

Drying times can vary based on temperature and humidity. Typically, allow at least 4-6 hours for recoating, but check the product can for specific guidance.

Yes, due to its tough and durable finish, it can be used on interior wooden surfaces like countertops, provided they are properly prepared and multiple coats are applied. Ensure it is fully cured before heavy use.

Tools should be cleaned immediately after use with a suitable solvent, such as white spirit or turpentine.

Yes, this resin-based varnish is generally compatible with existing oil-based finishes, provided the surface is clean, dry, and lightly abraded for adhesion.

This can be due to insufficient drying time between coats, humid conditions, or applying too thickly. Ensure adequate drying time in a well-ventilated area and apply thinner coats.

Apply the varnish in thinner, more even coats, and avoid overloading the brush. Wipe away any drips immediately with a clean brush or cloth before they set.

Ensure the surface was properly prepared and that the varnish was stirred thoroughly. Apply subsequent coats evenly and avoid over-brushing. Ensure consistent application technique.

Stir the varnish well before and during use. Ensure you are using a quality brush suitable for varnishes. Apply with smooth, consistent strokes.