Setup, Compatibility & Care
Surface Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and loose debris. For concrete, wood, and metal, a sound, unpainted surface is best. New timber or pressure-treated timber may require specific advice before application. For previously painted surfaces, ensure the old paint is sound and well-adhered; lightly abrade if necessary.
Application: For best results, apply using a roller. An extension pole can significantly ease application. Ensure adequate ventilation during use.
Compatibility: Suitable for concrete, wood, tarmac, stone, brickwork, and suitably prepared metal. Always test on a small, inconspicuous area if unsure.
Care: Clean application tools with water immediately after use. For the finished surface, clean with water and a mild detergent. Avoid abrasive cleaners.