Scalloped Roller Blind - Cream

For routine cleaning, gently dust the blind with a soft cloth or duster. For light marks, use a slightly damp cloth with a mild, diluted soap, dabbing the area carefully without saturating the fabric. Allow it to air dry completely.

While the high-quality materials offer durability, the product description does not specify moisture resistance. For high-humidity environments like bathrooms or kitchens, we recommend blinds specifically designed with moisture-resistant fabrics to prevent mold or mildew.

Yes, this roller blind can be installed either inside the window recess or on the wall or ceiling above the recess. Installing outside the recess can offer better light blockage and make the window appear larger. Ensure you measure accordingly for the desired coverage.

The description highlights the ability to 'easily adjust the amount of light entering your space' and create a 'cozy atmosphere.' This suggests the blind offers light filtering and privacy, but it is not explicitly described as a blackout blind. Expect significant light reduction, but not total darkness, especially around the edges.

Typical installation requires a pencil for marking, a tape measure, a drill, a screwdriver, and potentially a level to ensure straight mounting. All necessary fixings are generally supplied with the blind, but specific tool requirements will be detailed in the included instructions.

Carefully measure the width and drop of your window. For inside recess fitting, measure the exact width and height of the recess in three places and use the smallest measurement. For outside recess fitting, decide how much overlap you want on each side of the window, typically 5-10cm, and add that to your window's width and drop. Always refer to the detailed measuring guide provided by That Home Shop for precise instructions.

Check the mechanism for any obstructions, such as tangled fabric or debris. Ensure the blind is properly seated in its brackets and that the control chain/cord operates freely. If it feels stiff, try lubricating the internal mechanism with a silicone-based spray if accessible, following manufacturer guidelines.

Verify that both mounting brackets are installed level and at the same height. If they are, check the blind's internal rolling mechanism; sometimes the fabric can shift on the tube. Gently adjust the fabric alignment if possible, or re-level the brackets as needed.

This often indicates that the blind width is slightly too narrow for the window opening. Ensure your measurements were accurate and consider if an outside mount (mounted to the wall above the window) instead of an inside mount (within the window recess) might provide better coverage for your specific window dimensions.