Farrow & Ball Modern Emulsion Paint - Multicolor

Matt Finish Quick Drying Low VOC. This Farrow & Ball Modern Emulsion paint in Multicolor offers a ...

Currently unavailable

Colour

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This Farrow & Ball Modern Emulsion paint in Multicolor is designed for interior walls and ceilings, offering a sophisticated matt finish. It is quick-drying and low in VOCs, making it a suitable choice for health-conscious decorators. A potential consideration is ensuring proper surface preparation for optimal results.

All features

ColourMulticolor
Model Part Number5029496281323
BrandFarrow & Ball

Extended Product Information

FAQs

Is this paint suitable for bathrooms or kitchens?

While Modern Emulsion is washable, Farrow & Ball typically recommends their Estate Eggshell or Modern Eggshell for areas with higher moisture or frequent cleaning, such as kitchens and bathrooms, due to their increased durability and resistance to moisture.

How long does the paint take to dry?

The paint is quick drying. Typically, it can be recoated after 2-4 hours, but this can vary depending on temperature and humidity. Allow for thorough drying before heavy use or cleaning.

What is the VOC content?

This paint has a low VOC (Volatile Organic Compound) content, contributing to better indoor air quality.

Can I use this paint over existing oil-based paint?

Yes, but it's essential to prepare the surface properly. Clean the surface, lightly sand it to create a key, and apply an appropriate primer before applying the Modern Emulsion.

How do I clean the painted surface?

The painted surface can be gently wiped with a soft cloth dampened with water. Avoid using abrasive cleaners or excessive scrubbing, which can damage the matt finish.

What does 'Multicolor' refer to in the product name?

'Multicolor' in this context refers to the specific color name or shade of the paint. It does not mean the paint itself contains multiple colors in its finish.

Troubleshooting

Uneven color or finish

Ensure the paint was thoroughly stirred before and during use. Check that the surface was properly prepared and primed. Apply using a consistent technique, avoiding overworking the paint.

Paint not drying properly

Verify ambient temperature and humidity levels are within recommended ranges for painting. Ensure adequate ventilation. Avoid applying excessively thick coats.

Poor adhesion or peeling

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from dust or grease. Check that a suitable primer was used, especially on problematic surfaces.

Brush marks are visible

Use a high-quality brush and apply paint with a 'cross-over, lay-off' technique. Avoid applying too much pressure or over-brushing.

Pros and Cons

Pros

  • Achieves a sophisticated, low-sheen matt finish.
  • Faster project completion due to quick drying times.
  • Environmentally friendlier with low VOC content.
  • Durable and easy to maintain on walls and ceilings.
  • Reputable brand known for quality and color depth.

Cons

  • Requires careful surface preparation for a flawless finish.
  • Matt finishes can sometimes show brush marks more readily than glossier paints if not applied carefully.
  • May be more expensive than standard emulsion paints.
  • The 'Multicolor' designation may require specific color matching considerations for adjacent areas.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and free from dust, grease, and flaking paint.
  2. Fill any cracks or holes with appropriate filler and sand smooth once dry.
  3. Apply a suitable primer, particularly on new plaster, stained surfaces, or previously painted walls.
  4. Stir the paint thoroughly before and during application.

Compatibility:

This Modern Emulsion is designed for interior walls and ceilings.

Care:

  • For best results, use a good quality synthetic brush or a short-pile roller.
  • Apply in a "cross-over, lay-off" method for an even finish.
  • Allow sufficient drying time between coats (typically 2-4 hours, but check conditions).
  • Clean brushes and equipment immediately after use with water.
  • The paint is washable; use a soft, damp cloth to gently wipe away marks. Avoid abrasive cleaners.