Supergift.com Spray Paint - Cherry Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This SuperGift.com spray paint in Cherry Red is designed for DIY enthusiasts and professionals seeking a durable, high-shine finish on a variety of surfaces like wood, metal, and plastic. Its key benefit is the easy, streak-free application and fast-drying formula that provides excellent coverage. A potential consideration is ensuring adequate ventilation due to its aerosol nature.
All features
| Colour | Red |
|---|---|
| Model Part Number | CLRRDGLS |
| Brand | SuperGift.com |
Extended Product Information
FAQs
What surfaces can this spray paint be used on?
This spray paint is suitable for a variety of surfaces including wood, metal, plastic, and more, provided they are properly prepared.
How much area does one 400ml can cover?
A 400ml can provides excellent coverage, but the exact area will depend on the surface porosity and the thickness of the applied coats.
How long does the paint take to dry?
The formula is fast-drying, minimizing waiting time between coats. Specific drying times can be found on the product's packaging.
How do I prevent the nozzle from clogging?
After each use, turn the can upside down and spray for a few seconds until only clear propellant emerges. This clears any residual paint from the nozzle.
Is this paint suitable for outdoor use?
The paint creates a durable coating, making it suitable for many outdoor applications. However, performance may vary depending on environmental exposure and surface preparation.
Can I paint over an existing coat of paint?
Yes, provided the existing paint is sound and clean. Lightly sanding the surface may improve adhesion for a more durable finish.
Troubleshooting
Uneven spray or sputtering
Shake the can more vigorously. Ensure the nozzle is not clogged by turning the can upside down and spraying briefly to clear it. If the problem persists, try a new can.
Runs or drips
Apply paint in thinner, lighter coats. Hold the can at the recommended distance. Avoid over-applying paint in one pass.
Poor adhesion or peeling
Ensure the surface was properly cleaned, sanded (if necessary), and dried before application. Check for compatibility with the surface material.
Color not as expected
Ensure the surface underneath is a suitable color or has been primed appropriately. The final color can be influenced by the base surface and lighting conditions.
Pros and Cons
Pros
- Provides a high-quality gloss finish.
- Suitable for a wide range of materials.
- Fast-drying to improve project efficiency.
- Offers good coverage from a single can.
- Easy to apply without specialized tools.
Cons
- Requires proper ventilation during use.
- Aerosol cans can be difficult to use fully when low on product.
- Surface preparation is crucial for optimal adhesion.
- Color may vary slightly based on application technique and surface.
Setup, Compatibility & Care
Setup:
- Ensure the surface to be painted is clean, dry, and free from grease or rust. Lightly sand glossy surfaces for better adhesion.
- Shake the can vigorously for at least two minutes before use.
- Hold the can approximately 10-12 inches (25-30 cm) from the surface.
- Apply paint in light, even strokes, moving from side to side.
- Allow adequate drying time between coats (refer to can for specific times).
Compatibility:
Suitable for use on wood, metal, plastic, and other appropriately prepared surfaces.
Care:
Store the can upside down after use and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight and heat sources. Clean up wet paint immediately with appropriate solvents.