Mexco TDXCEL Diamond Tile Hole Saw 50mm - Mextdxl50

This drill bit is designed for porcelain, ceramic tiles, and other hard materials.

No, this drill bit is designed for dry cutting and does not require water thanks to its wax-filled core.

You will need either an angle grinder with an M14 thread or a mains drill with an M14 to Hex adaptor (57587).

For angle grinders, simply attach the bit to the M14 thread. For mains drills, use the M14 to Hex adaptor (57587).

Apply gentle pressure, maintain a perpendicular angle to the tile surface, and let the diamond coating do the work.

Ease up on the pressure and make sure the bit is aligned correctly. If needed, allow the bit to cool and try again.

The M14 to Hex adaptor (57587) is sold separately and is required for use with a mains drill.

Check if you are applying sufficient pressure. Ensure the bit is suitable for the material. Check for wear and tear on the diamond coating.

Reduce the drilling speed and/or the pressure. Allow the bit to cool down periodically. Make sure you are using the bit in the correct application.

Ease up on the pressure. Ensure the bit is aligned correctly. If needed, try using a small amount of water to cool the bit.