Arai RX-7V Evo Frost Helmet - Black

The RX-7V uses the Variable Axis System (VAS). To remove the visor, you typically need to open it to a specific position, release a locking mechanism (often a lever or tab on the side), and then carefully lift the visor away. Refer to the owner's manual for precise instructions for your model.

Yes, the interior liner of the Arai RX-7V Evo Frost helmet is designed to be removable and washable. Hand wash with mild soap and cold water, and allow it to air dry completely.

VAS is Arai's revolutionary visor pivoting system. It moves the visor pivot point lower and lower on the shell, allowing for a smoother shell shape in the temple area, which is crucial for deflecting energy in an impact.

Arai recommends replacing your helmet every 3-5 years from the date of first use, or immediately after any significant impact, regardless of visible damage, as internal protective structures can be compromised.

Yes, the RX-7V is generally compatible with most aftermarket Bluetooth communication systems. However, installation may require careful routing of wires and speakers within the liner to avoid interfering with fit or safety features. Some users opt for professional installation.

PB-SNC² stands for Peripherally Belted - Structural Net Composite 2. It is Arai's proprietary outer shell construction that includes a peripheral belt across the forehead, significantly increasing shell strength and integrity while maintaining a smooth, round shape for better energy dispersal.

The interior liner may need adjustment or breaking in. Consider consulting an Arai dealer for custom padding options or gently flexing the helmet in affected areas over time.

Ensure vents are clear of debris. Check that the vent mechanisms are moving freely. If obstruction persists, gently clean around the mechanism or seek professional assistance.

Ensure the visor is properly seated. Consider using a Pinlock anti-fog insert (if compatible and installed) or a reputable anti-fog spray.

Check that the visor is fully closed and sealed. Ensure all ventilation covers are securely in place. A poorly fitting helmet or riding position can also contribute to noise. Consider earplugs for long rides.