The SmallRig Camera Battery Charger 5490 is a high-efficiency, dual-slot charging solution designe...The SmallRig Camera Battery Charger 5490 is a high-efficiency, dual-slot charging solution designed for Canon LP-E6P, LP-E6NH, LP-E6N, and LP-E6 battery packs. Capable of charging two batteries simultaneously in approximately two hours, it features intelligent circuitry that monitors temperature and voltage to protect battery health through over-temperature and over-voltage safeguards. Each slot includes five-step LED indicators that display power levels in 20% increments, remaining active even when disconnected from power for convenient kit checks. The unit utilizes a versatile USB-C input compatible with wall adapters, car chargers, and power banks. To ensure optimal performance, it is recommended to use a power adapter with 22.5W or higher output.
The SmallRig Camera Battery Charger 5490 is an essential accessory for professional and enthusiast photographers using Canon LP-E6 series batteries. It provides a compact, dual-slot solution that charges two batteries simultaneously in roughly two hours via a universal USB-C connection, making it ideal for travel and field work. While it offers robust safety features and intuitive status monitoring, users should note that optimal charging speeds require a 22.5W or higher power adapter to ensure peak performance.
All features
Model Part Number
5490
Brand
SmallRig
Extended Product Information
FAQs
Does this charger include batteries?
No, the package includes the charging unit and a USB cable; batteries must be purchased separately.
Can I use this with a standard laptop USB port?
You can, but it is not recommended as most laptop ports do not provide the necessary 22.5W output required to charge two batteries in the advertised two-hour timeframe.
Is it safe to charge third-party batteries with this?
Yes, the SmallRig 5490 is designed to safely charge both official Canon batteries and compatible third-party batteries.
Can I check the battery level without plugging the charger in?
Yes, the five-step LED indicator allows you to check the battery capacity at the touch of a button even when no power source is connected.
What happens if the charger gets too hot?
The internal intelligent circuitry will detect the rising temperature and automatically slow down the charging process to prevent damage to the battery and the charger.
What is the charging time for two batteries?
When using a power source of 22.5W or higher, the unit can fully charge two LP-E6 series batteries in approximately two hours.
Troubleshooting
Batteries are charging slowly
Ensure your wall adapter or power bank supports at least 22.5W output; lower-wattage power sources will significantly increase charging time.
LED indicator flashes a red warning light
A red warning light typically indicates the battery level is critically low; continue charging until the LED progress bar begins to move.
Charger does not start
Check the USB-C connection to ensure it is fully seated and verify that your power source (adapter or power bank) is active.
Pros and Cons
Pros
Simultaneous dual-battery charging saves significant time
Compact and lightweight design ideal for travel
Integrated status checks without needing power connection
Universal USB-C connectivity for versatile power sourcing
Requires a 22.5W or higher adapter for maximum speed
No internal battery; must be connected to an external power source
Compatible only with Canon LP-E6 series batteries
Setup, Compatibility & Care
Setup: Connect the provided USB cable to a power adapter with at least 22.5W output. Insert your LP-E6 batteries into the slots. The LEDs will blink to indicate charging progress.
Compatibility: The unit is compatible with Canon LP-E6, LP-E6N, LP-E6NH, and LP-E6P batteries. It is verified to function with both official Canon batteries and third-party equivalents.
Care: Keep the contact points clean and dry. Avoid operating the charger in environments outside the 0 - 45 °C temperature range. When not in use, store the unit in a cool, dry place and disconnect it from the power source to conserve the longevity of the charging components.