The Tile Sticker Company Tile Stickers - Blue - Geometric
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and renters looking to refresh their kitchen, bathroom, or fireplace quickly and affordably. The key benefit is an easy, renovation-free update with durable, waterproof, and removable tile stickers. A caveat is that they are best suited for flat, smooth surfaces. These high-quality, geometric blue tile stickers transform existing tiles or walls, offering a stylish upgrade without the mess or cost of a full tile replacement. They are designed for longevity, easy to cut for custom fits, and leave no residue upon removal.
All features
| Colour | Blue |
|---|---|
| Pattern | Geometric |
| Model Part Number | 20 |
| Brand | The Tile Sticker Company |
Extended Product Information
FAQs
Can I use these stickers in a shower?
Yes, these stickers are waterproof and oilproof, making them suitable for use in bathrooms, including shower areas, provided the surface is smooth and properly sealed.
How long do these stickers typically last?
With proper application and care, these high-quality stickers are designed to last for an extended period, often several years, especially in moderate-traffic areas.
Are these stickers safe to use over existing tiles?
Yes, they are designed to be applied directly over existing smooth tiles. Ensure the original tiles are clean and free from grout residue for best adhesion.
Can I cut the stickers to fit my specific space?
Absolutely. The stickers can be easily trimmed with sharp scissors or a craft knife to fit any area, including around outlets or fixtures.
What happens if I make a mistake during application?
You can gently lift the sticker and reposition it. For best results, work slowly and smooth out any air bubbles as you apply.
Will these stickers damage my walls or tiles when removed?
When removed carefully from compatible surfaces, they should not leave residue or damage the underlying finish. Always test in a small, inconspicuous area first if concerned.
Can I layer these stickers on top of each other?
It is not recommended to layer these stickers. Applying them over each other may affect adhesion and the final appearance.
Troubleshooting
Sticker not adhering properly
Ensure the surface is completely clean, dry, and free of dust or grease. Re-apply pressure to the sticker, especially at the edges. For textured surfaces, consider using a primer or ensuring they are very smooth.
Air bubbles under the sticker
If bubbles appear during application, lift the sticker carefully and reapply, smoothing it down from the center outwards. For small, persistent bubbles, you can gently prick them with a fine needle and smooth the air out.
Difficulty removing residue
If any sticky residue remains after removal (rare on appropriate surfaces), use a mild adhesive remover or a bit of rubbing alcohol on a soft cloth to gently wipe it away. Test in an inconspicuous area first.
Sticker peeling at edges
Ensure the surface was properly prepped. Apply firm pressure along the edges. For added security in high-moisture areas, a heat gun on a low setting (held at a distance) can help activate the adhesive, but use with caution.
Pros and Cons
Pros
- Quick and easy way to update a space's look.
- Cost-effective alternative to traditional tiling.
- Waterproof and oilproof features enhance durability in wet areas.
- Removable without damaging surfaces, making them renter-friendly.
- Can be cut to size for a custom fit.
Cons
- Best suited for flat, smooth, non-porous surfaces.
- May not adhere well to heavily textured or uneven walls.
- Requires careful application to avoid air bubbles.
- Long-term durability may vary based on surface preparation and environmental conditions.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and smooth. Remove any dust, grease, or grime.
- Measure and trim the sticker if necessary using scissors.
- Peel back a small section of the backing paper.
- Align the sticker with the edge of the surface or existing tile and carefully apply, smoothing as you go.
- Gradually peel off the backing paper while smoothing the sticker down to prevent air bubbles.
Compatibility:
These stickers are suitable for a wide range of smooth, non-porous surfaces including:
- Ceramic tiles
- Glass
- Metal
- Painted walls (ensure paint is fully cured and smooth)
- Marble
- Wood (sealed and smooth)
Avoid applying to textured wallpaper, unfinished wood, or uneven surfaces.
Care:
Clean with a soft, damp cloth and mild soap if needed. Avoid abrasive cleaners or scrubbing pads, which can damage the surface. Wipe up spills promptly, especially oil-based ones.