Best current price£75.60from HSS Hire
Shopping.co.uk recommended and popular offers
HSS Hire£75.60Visit shop Zinsser Black Allweather Masonry Paint 5L
Visit shop
B&Q£86.85Visit shop B&Q - All Weather MasonryBlack5 Litre
Visit shop2 offers from £75.60 - £86.85
View price history by clicking the chart icon.
This Zinsser All Weather 5L Black masonry paint is designed for homeowners and professional decorators seeking a durable, long-lasting finish on exterior masonry surfaces. Its key benefit is its ability to be applied in very low temperatures, down to -5°C, and its quick drying time, allowing for year-round application regardless of weather conditions. A potential caveat is that it contains a biocide to protect the dried film, which is important for users to be aware of.
| Colour | Black |
|---|---|
| Model Part Number | 5037898614649 |
| Brand | Zinsser |
Yes, Zinsser All Weather Masonry Paint can be applied at temperatures as low as -5°C. However, ensure the surface itself is not frozen.
In many cases, it is self-priming and will bond to existing paints without sanding. However, for bare, chalky, or highly porous surfaces, a Zinsser primer may still be recommended for optimal adhesion.
The paint is showerproof in approximately 20 minutes after application.
The coverage rate is approximately 12 square metres per litre.
Clean all tools and equipment with water immediately after use.
It means the paint contains an active ingredient (biocide) that protects the dried paint film from attack by fungal and algal degradation. Once dried, the paint film is classified as a treated article.
This product is specifically designed for exterior masonry surfaces and is not recommended for interior use.
Touch dry means the surface is dry to the touch and unlikely to be easily smudged. Full cure means the paint has hardened throughout and achieved its maximum durability and resistance. Full cure takes 7 days.
Ensure the surface was properly prepared and free from dust, dirt, and grease. If applying to bare or highly porous surfaces, consider using a Zinsser primer before painting.
Ensure the paint is stirred thoroughly before and during application. Apply in even coats, maintaining a wet edge to avoid lap marks. Use a good quality brush or roller suitable for masonry paints.
Drying times are dependent on temperature and humidity. Ensure application is within the recommended temperature range (above -5°C) and avoid painting in very humid conditions. If applied too thickly, drying may be extended.
While the paint contains a biocide, heavy contamination or a very damp environment may still lead to growth. Clean the affected area thoroughly. Ensure the surface is dry and well-ventilated before repainting. Check that two coats were applied.
Surface Preparation:
Ensure all surfaces are clean, dry, and free from dirt, grease, and loose or flaking paint. Remove any existing mould or mildew. In many instances, the paint will act as a self-primer on previously painted surfaces, bonding without the need for sanding. However, for bare, porous, or chalky surfaces, a suitable Zinsser primer may be required for optimal adhesion.
Compatibility:
Suitable for bare or previously painted masonry surfaces including concrete, render, stucco, brick, and stone. It is designed for exterior use.
Application:
Stir thoroughly before use. Apply by brush or roller. Two coats are recommended for best results. Apply the first coat and allow it to dry for a minimum of 3 hours before applying the second coat.
Coverage:
Approximately 12m² per litre.
Drying Times:
Care:
Clean tools and equipment immediately after use with water. The dried paint film contains a biocide to protect against fungal and algal degradation. After the paint is fully cured, the surface can be wiped down with a damp cloth and mild detergent if necessary.
