Narrow 6 Drawer Shoe Cabinet - White

Assembly time can vary based on individual experience, but typically it can take 1-2 hours for one person following the detailed instructions provided. It's recommended to have a helper for certain steps.

The cabinet dimensions are 17cm (Depth) x 102cm (Width) x 126.5cm (Height).

While the cabinet is designed for 'standard size men's shoes', some low-profile boots or certain high heels might fit, possibly by storing them on their side or one per compartment. However, tall boots or very high heels are generally not recommended due to space constraints within the pull-down compartments.

The cabinet is designed to hold 'at least a dozen pairs of standard size men’s shoes', with each of the six compartments holding approximately two pairs.

For routine cleaning, use a soft, damp cloth with water. For tougher marks, a mild soap solution can be used, followed by wiping with a clean, damp cloth and then drying. Avoid abrasive cleaners or scouring pads.

Yes, for safety and stability, especially given its height and narrow depth, it is highly recommended to anchor the cabinet to the wall using the provided anti-tip kit. This prevents accidental tipping.

No, this cabinet is designed for indoor use only. Exposure to outdoor elements like moisture and direct sunlight can damage the matt painted finish and structural integrity.

Ensure all screws are fully tightened. Verify that the cabinet is placed on a level surface. Crucially, use the provided wall anchoring kit to secure the cabinet firmly to the wall; this is essential for stability and safety.

Check that the compartment runners/mechanisms are correctly installed and free from obstructions. Ensure no shoes are overfilling the compartment, preventing it from closing. Review assembly steps for correct alignment of compartment components.

The cabinet is designed for 'standard size men's shoes'. For larger shoes, boots, or high heels, you may need to store them at an angle, one per compartment, or in alternate locations. Verify the shoe size against the intended capacity.

Ensure the cabinet is positioned correctly, allowing the profiled plinth to arc over your skirting board. If the issue persists, check for any obstructions behind the cabinet or unevenness in the floor or wall.

Carefully re-check all connections and screws. Sometimes loosening and re-tightening specific screws in sequence can help parts align better. Ensure all dowels are fully inserted and panels are properly seated.