Danfoss RAS-C2 Angled Thermostatic Radiator Valve and Lockshield Pack - White

Rotate the numbered dial on the thermostatic valve to set the desired temperature. The temperature range is 8-28°C.

The lockshield valve helps balance your heating system. It ensures that all radiators heat up evenly by controlling the flow of water to each radiator.

While the installation is straightforward, it's recommended to have some basic plumbing knowledge. If you're unsure, consult a professional.

Check the temperature setting. If the setting is too low, increase the temperature. Bleed the radiator to remove trapped air. Inspect the valve for any blockages or damage.

Turn the valve to the positive off position and close the lockshield valve. Ensure the system is cooled down before disconnecting.

The frost protection setting automatically keeps the radiator at a low temperature to prevent freezing, even when the system is off.

Wipe the valve with a damp cloth. Check for leaks periodically and bleed the radiator if necessary.

Check the valve's temperature setting. Ensure the valve is not in the off position. Check for airlocks and bleed the radiator if necessary.

Check the lockshield valve settings to ensure proper balancing of the heating system. Consult a professional if necessary.

Tighten the connections. If the leak persists, check the seals and replace if needed. Turn off the heating system immediately.