Pine Apex Porch Canopy Kit - 1600mm - Jackson Woodturners - JWPC02

The overall dimensions are 1960mm (Width) x 1305mm (Height). The canopy has a pitch of 30°.

The gallows brackets have a projection of 605mm and a height of 666mm.

The canopy is designed for doors up to 1600mm wide. For installation, you will need a solid wall capable of supporting the gallows brackets.

No, the canopy is supplied in unfinished pine and requires treatment and finishing (painting or staining) by the user.

No, the traditional porch finial is an optional accessory sold separately.

Regular inspection and reapplication of exterior paint or stain every 2-3 years are recommended to maintain its appearance and protect the timber.

Yes, it is essential to treat the pine timber with an exterior-grade preservative before applying paint or stain for durability and protection.

Ensure the initial preservative treatment was thorough and evenly applied. Reapply a suitable topcoat (paint or stain) to provide consistent protection.

Check that all fixings are tightened securely into the wall. If the wall material is suspect, use appropriate wall plugs or anchors for the specific wall type.

The surface may not have been properly prepared before painting or staining, or the paint/stain is old. Lightly sand the affected area, clean thoroughly, and reapply a high-quality exterior finish.