Internal Oak Suffolk - Beige - OOSUF28
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The XL Joinery Internal Oak Suffolk door is an ideal choice for homeowners and interior designers seeking a timeless aesthetic for modern or traditional apartments. Featuring a classic 6-slat boarded design with deep u-grooves and a high-quality real oak veneer, this door adds warmth and character to any living space. While it offers versatile styling and the ability to trim to size for a custom fit, users should note that the door arrives unfinished, requiring staining, varnishing, or painting before installation.
All features
| Colour | Beige |
|---|---|
| Model Part Number | OOSUF28 |
| Brand | XL Joinery |
Extended Product Information
FAQs
Does this door come with hinges and handles?
No, the door is supplied as a door leaf only. You will need to purchase compatible hinges and latch hardware separately.
Can I paint this door?
While the oak veneer is designed to be stained or oiled to show the wood grain, it can be painted if you use a high-quality wood primer first.
What is the maximum amount I can trim?
You can trim up to 15mm from each of the four edges, provided you do not cut into the solid wood lipping to a point where the core is exposed.
Is this a solid core door?
The Suffolk range typically uses an engineered core covered in real oak veneer to provide stability and resistance to warping.
Can I use this as a bathroom door?
Yes, but you must ensure that all surfaces, especially the top and bottom edges, are thoroughly sealed with a moisture-resistant finish to prevent the wood from absorbing humidity.
Troubleshooting
The door sticks or rubs against the frame
Check if the frame is square. Use a block plane to carefully shave small amounts from the edge, ensuring you re-seal the exposed wood immediately.
Veneer surface looks dry or dull
This is expected as the door is unfinished. Apply a high-quality wood oil or varnish to nourish the oak veneer and restore its natural luster.
Pros and Cons
Pros
- Authentic real oak veneer finish
- Classic, versatile 6-slat architectural design
- Customizable finish allows for personal interior styling
- Up to 15mm trimming allowance on all sides for easier installation
Cons
- Requires professional finishing (staining or varnishing) prior to hanging
- Not supplied with hardware like hinges or handles
- Heavier than hollow-core internal doors
Setup, Compatibility & Care
Installation requires basic woodworking tools. To ensure a perfect fit, measure your existing opening width and height in three places to account for any irregularities in the door frame. Because the door features solid oak lipping, you can safely remove up to 15mm from each edge; however, ensure you maintain the structural integrity of the frame.
Care Instructions:
- Store the door flat in a dry, climate-controlled environment until ready for installation.
- Before hanging, apply your chosen finish (stain, lacquer, or oil) to all faces and edges.
- Wipe down periodically with a slightly damp cloth; avoid harsh chemical cleaners which may strip the protective finish or damage the natural veneer.