20 Halloween Bat LED Micro String Lights - White

These lights require 3 x AA batteries, which are sold separately.

The cable length with the lights is 1.9 meters. There is also a 50cm lead wire from the battery box to the first light.

No, these lights are designed for indoor use only and are not weatherproof.

When set to ‘TIMER’, the lights will illuminate for 6 hours and then automatically switch off. They will then turn on again at the same time the following day.

Each bat figure measures approximately (W) 3cm x (H) 1.8cm x (D) 0.7cm.

The LEDs are integrated into the string and are not individually replaceable.

The wire is a delicate silver colour.

Ensure batteries are inserted correctly with the proper polarity. Check if the batteries are fresh and replace if necessary. Make sure the switch on the battery box is in the ‘ON’ or ‘TIMER’ position.

This could be due to a loose battery connection. Re-seat the batteries firmly in the compartment. If the issue persists, try a new set of batteries.

Confirm that the switch is set to the ‘TIMER’ position. Ensure the batteries have sufficient power, as low battery levels can affect timer functionality. The timer typically activates after the first 6-hour cycle in the ‘ON’ position.

Carefully and slowly untangle the wire, supporting the bat figures to avoid stressing the connections. It is often easiest to lay the entire string out and gently loosen knots.