Crown Easyclean - White

This emulsion is suitable for interior walls, ceilings, wood, and metal surfaces.

Easyclean Matt Emulsion is formulated to be significantly more washable and durable, being up to 200 times tougher than Crown's standard matt paints, allowing for repeated cleaning without damage.

Use a soft, damp cloth or sponge with a mild detergent. Wipe gently and rinse with clean water. Avoid abrasive cleaners.

Yes, its high washability makes it ideal for kitchens and other high-traffic areas where frequent cleaning is necessary.

Ensure surfaces are clean and dry. A suitable primer may be necessary depending on the surface condition and previous finish. Consult Crown Paints recommendations for specific guidance.

Drying times can vary based on conditions, but typically, it is touch dry within a few hours and recoatable after several hours. Always refer to the product's specific instructions for precise timings.

Yes, the matt finish is effective at reducing glare and helping to conceal minor surface imperfections.

Ensure the surface is properly prepared and primed. Apply paint evenly with a brush or roller, avoiding over-application. Consider a second coat after the first has dried completely.

Use a soft, damp cloth with mild soap. Wipe gently and rinse with clean water. Avoid using harsh chemicals or abrasive materials that could strip the paint.

This can occur if the paint was applied too thinly or unevenly. Ensure consistent application technique and consider a touch-up with a third coat if necessary, following the recommended application methods.

Ensure adequate ventilation during and after painting. Check that the correct drying times between coats have been observed. If the issue persists, it may indicate a problem with application or environmental conditions; allow more time for curing in a well-ventilated space.