Rustins Quick Dry Outdoor Wood Stain - Dark Oak - Brown

The stain is touch dry in approximately 30 minutes and can be recoated after 4 hours.

It is suitable for exterior joinery, doors, windows, garden furniture, conservatories, and can also be used as a sealer for concrete.

For optimal protection, apply two or more coats, depending on the wood's absorbency and desired color intensity.

Clean brushes with water immediately after use.

Yes, it contains UV inhibitors to help prevent fading.

Coverage is approximately 12-15m² per litre per coat, depending on the absorbency of the surface.

It is recommended to remove any existing finish and prepare the wood surface properly before applying this stain. Test on a small, inconspicuous area first.

No, it is low odor, making it easier to work with.

Ensure the application surface is clean, dry, and free of any contaminants. Check the room temperature and humidity; ensure it is within the recommended range. Apply in thin coats, and allow sufficient drying time between coats.

Ensure the stain is well-mixed before use. Apply the stain evenly, following the wood grain. Sand the surface lightly between coats to improve adhesion and appearance.

Ensure the surface is properly prepared and free from old coatings. Apply thin coats and avoid over-application. Ensure the surface is dry before application. Consider a light sanding between coats.

The coverage can vary depending on the absorbency of the wood. Ensure you are applying a thin and even coat. Consider applying multiple coats, and always test the coverage on a small, less visible area.