Evo-Stik Flooring Adhesive - 2.5 Litre - Cream

It is suitable for use on interior porous floors such as concrete, cement/sand screed, wood, chipboard, and plywood.

This adhesive is suitable for most types of PVC flooring, cork tiles, linoleum, latex foam or jute backed carpeting.

One litre of adhesive will cover approximately 3m² to 4m², depending on the floor covering.

Ensure the surface is clean, dry, and free from any loose materials or contaminants. Remove any old adhesive residue before application.

Clean tools and spills immediately with water while the adhesive is still wet. Once dry, removal may require solvents.

No, this adhesive is designed for interior use only.

The shelf life can vary. Always check the expiration date on the product packaging.

Ensure the substrate is clean and prepared correctly. Check that the correct amount of adhesive has been applied and that sufficient pressure was applied during installation. Check the expiration date of the adhesive.

Ensure proper ventilation in the room. Check the temperature and humidity levels, as these can affect drying time.

Apply the adhesive evenly and avoid excessive amounts. Remove any excess adhesive immediately with a damp cloth.