Portwest Ev4 Shell Rain Jacket - Grey - M

The jacket has a WP (Waterproof) rating of 20,000MM and an MVP (Moisture Vapor Permeability) rating of 10,000g/m2/24hrs, meeting EN 343 Class 4:4 standards.

The EV4 Shell Jacket is designed as a waterproof and windproof outer layer. For extreme cold, it should be layered over insulating garments. It provides protection from the elements but does not have inherent thermal insulation.

The jacket's design, including its ergonomic fit and harness-friendly zips, should accommodate a backpack comfortably for general use. However, extensive abrasion from rough backpack straps over long periods could potentially affect the fabric's surface.

When washing, avoid direct ironing on the reflective print. Gentle washing according to the care label should preserve the print. Harsh scrubbing or high-temperature ironing can damage it.

ActiReach™ refers to a specific design feature in the armhole construction that allows for enhanced range of motion and comfort, particularly when reaching or performing overhead tasks, preventing the jacket from riding up.

No, this is a shell jacket, meaning it does not have an integrated or removable lining. It is designed to be worn as an outer protective layer.

The shell fabric is Portwest Extreme Waterproof & Breathable, composed of 100% Polyester 75D stretch fabric with a TPU Membrane bonded to 100% Polyester 30D Tricot, creating a 3-layer construction.

Ensure you followed the washcare instructions precisely. Avoid high heat during drying or ironing, as this can damage the fabric's waterproof and breathable membrane. Consider using a fabric conditioner specifically designed for technical outdoor wear if recommended by the manufacturer.

Check that all zippers are fully closed. Inspect the taped seams for any signs of damage or delamination. While the jacket is waterproof, prolonged exposure to heavy downpours might eventually test its limits. For zippers, ensure they are clean and free from debris. Consider applying a zipper lubricant.

Ensure the underarm pit zips are open if you are active. Check that the jacket's internal lining is clean; dirt and oils can clog the breathable membrane. Wash the jacket according to care instructions. If the issue persists, the membrane may be compromised.

Ensure the drawcords are free to move and are not tangled. Make sure the hood is positioned correctly over the helmet (if worn) before tightening. Check for any obstructions in the drawcord channels.