Gezu Impex Bolt Down Fence Post Support - Silver - 100 X 100 mm (Pack Of 8)

This specific model is designed for wooden posts with dimensions of 100 x 100 mm.

The type of fixings depends on your mounting surface. For concrete, use concrete screws or anchor bolts. For wood decking, use appropriate lag bolts. Always ensure your fixings are corrosion-resistant.

No, the primary advantage of this bolt-down support is that it fixes directly to a hard surface, eliminating the need for digging holes.

It is designed for use on solid, level surfaces. If your ground is uneven, you will need to create a level base (e.g., with concrete) before mounting the support.

Simply loosen the two clamp bolts using a wrench. This will allow you to slide the post out for adjustment or replacement. Once done, retighten the bolts securely.

The support features a powder coating for durability and resistance to corrosion and UV damage. However, like any exterior finish, it can be scratched or chipped over time. Regular checks and touch-ups can help maintain its longevity.

Yes, it provides a heavy-duty and stable solution suitable for various outdoor structures, including fence posts, pergolas, deck supports, and carports, provided the base is adequately prepared and secured.

Ensure the post support is securely fastened to the base surface and that the twin clamp bolts are tightened firmly against the wooden post. Check that the base surface is level.

Verify that the wooden post dimensions are within the 100 x 100 mm specification of the support and that the socket is free from debris. Slight sanding of the post edges may be required if the fit is very tight.

Reposition the post support before drilling. If holes are already drilled, you may need to use alternative mounting hardware or slightly adjust the post's final position if feasible.

Clean the affected area. If the powder coating is chipped, sand the area lightly and apply an exterior-grade metal primer and paint to prevent further rust.