Setup, Compatibility & Care
Preparation:
Ensure surfaces are clean, dry, and free from grease or dust. For most surfaces, no priming or sanding is needed. For highly glossy surfaces or areas prone to heavy wear, a light scuff sand may improve adhesion. Ensure previously painted or varnished surfaces are sound.
Application:
Stir the paint thoroughly before use. Apply using a good quality brush or roller. Apply two thin, even coats for best results, allowing adequate drying time between coats (typically 1-2 hours, but check ambient conditions). Frenchic Citrine Al Fresco can be applied to furniture, woodwork, laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (avoiding very wet areas), kitchen cupboards, front doors, and interior wood and concrete floors.
Care:
Clean brushes and equipment immediately after use with water. For cleaning painted surfaces, use a soft, damp cloth. Avoid abrasive cleaners or excessive scrubbing to maintain the finish.
Compatibility:
This paint is suitable for interior and exterior use. It is compatible with most standard painting tools. It is not recommended for direct use in shower enclosures or bath surrounds due to constant water exposure.