Frenchic Smoke Signal Al Fresco - 250ml

A 750ml tin covers up to 12.5m² per coat, meaning approximately 6m² for two coats. A 250ml tin covers approximately 2m² for two coats.

This paint is self-priming for many surfaces. However, for very porous surfaces or highly glossy finishes, using a dedicated primer can improve adhesion and results.

It can be used on ceramic wall tiles, but it is not recommended for very wet areas such as shower surrounds or bath surrounds.

Yes, Frenchic Al Fresco paint is designed for both interior and exterior use and is weatherproof and hardwearing.

Allow adequate drying time between coats, typically a few hours, depending on temperature and humidity. The paint should feel dry to the touch before the second coat is applied.

The paint has a matte finish.

Yes, it is EN71-3 certified, making it safe for use on children's toys.

As this is a water-based paint, clean brushes, rollers, and any spills with soap and water immediately after use.

Stir the paint thoroughly. If still too thick, a very small amount of water (e.g., 10% by volume) can be added, but avoid over-thinning.

Ensure the surface was properly cleaned and degreased before application. Glossy surfaces may need light sanding. For difficult surfaces, consider using a dedicated primer.

Ensure the paint is thoroughly stirred before and during use. Apply paint evenly with consistent brush strokes. Allow adequate drying time between coats and ensure the second coat is applied evenly over the first.

Check environmental conditions; avoid painting in very cold or humid temperatures. Ensure coats are not applied too thickly. Allow more time for drying, especially for the final coat.