Speedy Streamline PVC Curtain Track - White

No, this Speedy Streamline track is designed for light to medium weight curtains only. Heavy blackout curtains may cause the track to sag or the gliders to stick.

You can cut the PVC track to your desired length using a fine-tooth saw or strong PVC cutters. Always measure twice and cut carefully for a clean edge.

The track is designed to be easily bent by hand. Apply gentle, consistent pressure to create smooth curves. It can even be reverse bent if you over-bend it initially.

Each pack includes 5 meters of PVC track, 50 gliders with built-in hooks and eyelets, and 20 brackets. End stops with hooks and eyelets are also included.

While PVC can be painted, it typically requires specific plastic-compatible primers and paints for proper adhesion and durability. It is recommended to use the track in its original white finish for best results.

For optimal support, especially on curved sections or with medium-weight curtains, place brackets every 40-60 cm. For straight runs with lighter curtains, slightly wider spacing might be acceptable, but always ensure stability.

For tracks over 210cm, you will receive two pieces and a track connector. Simply align the ends of the two track sections and firmly push the connector into both ends until they are securely joined and aligned.

Check gliders for any dust or debris; wipe them clean. Ensure the track itself is free from obstructions. Verify the curtains are not too heavy for the track's capacity.

While flexible, PVC has limits. Ensure the bends are not too sharp or tight, which can cause it to spring back. Add more brackets around curves to provide additional support.

Ensure brackets are spaced appropriately, especially for longer runs or if the track is supporting the maximum recommended curtain weight. Add an extra bracket for support.

Ensure the track connector is fully inserted and the two track pieces are perfectly aligned. You may need to gently wiggle the pieces into place for a seamless join.