AUDIO PRO A48 Wireless Multi-room Speakers - Black

The left speaker is the main powered unit and connects to the right speaker using the provided 4-meter Speakon cable. Ensure the cable is securely plugged into both speakers.

The A48 W speakers are designed as a stereo pair for immersive listening. They do not directly support traditional surround sound setups (e.g., 5.1 or 7.1) but can be integrated into a multi-room audio system.

The speakers require a wired connection between the left and right units. However, they offer extensive *wireless* connectivity for audio sources via Wi-Fi, AirPlay 2, Chromecast, and Bluetooth.

You can access these services directly through the Audio Pro app or by using the dedicated buttons on the remote control (if applicable) after initial setup and account linking.

The Wi-Fi range depends on your home network. The A48 W supports dual-band Wi-Fi (2.4 GHz and 5 GHz) for optimal performance and stability within the range of your router.

Yes, the Audio Pro A48 W speakers feature adjustable bass and treble controls, accessible via the Audio Pro app or the included remote control, allowing you to fine-tune the sound to your preference.

The total system power is 320W, distributed as 2x130W for the woofers and 2x30W for the tweeters. The left speaker acts as the primary amplifier.

Ensure the AC power cable is securely connected to the main speaker and a working power outlet. Check that the volume is not muted or set too low. Verify the input source is correctly selected and that the cable connecting the two speakers is secure.

Restart your router and the speakers. Ensure the speakers are within range of your Wi-Fi signal. If using dual-band, try connecting to the 5 GHz band for potentially better performance, or the 2.4 GHz band if range is an issue. Update speaker firmware via the Audio Pro app if available.

Ensure Bluetooth is enabled on your source device and that the speakers are in pairing mode (refer to the user manual for specific instructions). Move your source device closer to the speakers. Turn off Bluetooth on other nearby devices to avoid interference. Reset the speaker's Bluetooth connection if possible.

Confirm speakers are powered on and connected to the same Wi-Fi network as your mobile device. Restart the Audio Pro app and your mobile device. Ensure your mobile device's Wi-Fi is active.

Check for physical obstructions around the speakers. Reduce the volume slightly. Ensure the audio source is not clipping. If distortion persists, check bass and treble settings and try resetting the speakers.