Rust-Oleum Universal All Surface Spray Paint 400ml - Racing Green Gloss

The paint is dry to the touch in approximately 24 hours. Full curing may take longer, so avoid heavy use or exposure to moisture during this period.

This is an all-surface spray paint, suitable for metal, wood, plastic, masonry, ceramics, glass, and more.

The average coverage is approximately 2m² per litre, depending on the surface and application thickness.

Yes, this paint is formulated for both interior and exterior use and offers resistance to fading and chipping.

Clean the plastic surface thoroughly. Light sanding may help, and for optimal adhesion, consider using a primer specifically designed for plastic before applying the Rust-Oleum spray paint.

After use, turn the can upside down and spray for a few seconds to clear the nozzle. If it is already clogged, remove the nozzle and soak it in warm water or mineral spirits, then rinse thoroughly before reattaching.

Yes, the formulation includes rust preventative properties, making it ideal for protecting metal surfaces.

Ensure the nozzle is not clogged. Shake the can vigorously. If the issue persists, try rinsing the nozzle with warm water or replacing it.

Check surface preparation. The surface must be clean, dry, and free from contaminants like oil or grease. Lightly sanding the surface can improve adhesion.

Apply paint in thin, even coats rather than one heavy coat. Hold the can upright at a consistent distance from the surface and move with a steady motion. Allow proper drying time between coats.

Apply additional thin coats. Ensure the can was shaken sufficiently and paint is being applied at the correct distance. For very dark or demanding surfaces, a primer may be necessary.