Dulux Trade Ultra Matt - White - 10 Litre

While suitable for most interior rooms, it is primarily designed for ceilings and areas with critical lighting. For high-moisture areas like bathrooms, a more specialised bathroom paint with enhanced moisture resistance may be a better choice, or ensure excellent ventilation if using this product.

No, dilution is not required and not recommended. The paint is formulated to be used at its ready-mixed consistency for optimal performance and finish.

The paint typically dries in 4 hours. This is also the recoat time. Drying times can be affected by temperature and humidity levels.

Dulux Trade Ultra Matt provides a surface coverage of approximately 16 square meters per litre.

Yes, it is suitable for use on interior walls as well as ceilings, particularly in areas where a non-reflective finish is desired.

After use, remove as much paint as possible from your brushes and rollers, then clean them thoroughly with water.

This paint has a very low VOC content, specified as 1 g/l, falling into the 'Minimal (0 - 0.29%)' VOC content labelling system category.

The anti-flashing formulation helps to ensure that the paint dries evenly, preventing unsightly sheen differences or 'flashes' that can occur when touching up or painting large surfaces.

Ensure thorough stirring before and during application. Apply paint evenly, avoiding overworking thin patches. The anti-flashing formulation helps, but proper technique is key. Ensure adequate lighting during application to spot inconsistencies.

Allow the initial coat to dry completely. Use a small brush and apply thin coats to the touched-up area. Feather the edges carefully. Ensure the area is clean and dry before touching up.

Ensure the paint is thoroughly stirred. If a roller is used, ensure it is suitable for matt finishes and is not overloaded. For spray application, ensure the correct pressure and nozzle size are used. Avoid applying in extreme temperatures.

Surface preparation is critical. Ensure the surface was clean, dry, and sound before painting. Apply a suitable primer (like Dulux Trade Drywall Primer Sealer) on new or bare surfaces. Remove any loose or flaking paint before repainting.